As a consequence an extracted PCI ROM file usually can be inserted into each mainboard BIOS, which already contains the same sort of PCI ROM module.īasically the extraction and the replacement procedure of all PCI ROM modules is quite similar. Each PCI ROM module version, which has been delivered from the Controller chip vendor to the mainboard manufacturers, is identical and not dependent on the BIOS structure (AMI/Phoenix/Award) the mainboard manufacturer is using. Nevertheless it is possible to extract any PCI ROM module and to replaced it by another version, because the entire mainboard BIOS file has a modular structure.Īlthough the BIOS files are developed and published by the mainboard manufacturer, the inserted PCI ROM modules were made by the vendor of the related on-board Controller chips. The PCI ROM modules are within the mainboard BIOS file and only visible by opening the BIOS file with a special tool like MMTool or CBROM. That is the reason why users with an AHCI (non-RAID) system will not benefit from an update of the RAID ROM version. The Intel SATA AHCI Controller of the mainboard is not supported at all by the RAID ROM module. Everything you are doing will be at your own risk.Īctual BIOS files do not contain any separate AHCI ROM module, because such BIOS module resp. There is no warranty regarding the safety of my BIOS modding guides and the linked BIOS and PCI ROM files. ![]() This is why I recommend to flash a modded BIOS only for experienced users, who know about the risks and do all necessary preparations for a possible failure of the BIOS update process (inclusive a complete backup of their data). In the worst case you may not be able to use the computer anymore until you will get a new and working BIOS chip from the manufacturer of your mainboard. Warning: Modding a BIOS file by updating the inserted PCI ROM module is neither very difficult nor risky, but it is dangerous, if you are going to flash a modded BIOS into the BIOS chip of a mainboard. Since I have some experience regarding the extraction and replacement of PCI ROM modules, which are part of the mainboard BIOS, I decided to create and to publish step-by-step guides for the different AMI/Award/Phoenix BIOS structures.Īlthough these detailed instructions are mainly written for users, who want to update the Intel RAID ROM module of their mainboard BIOS, they basically can be used for the extraction and replacement of any other PCI ROM module too.īIOS Modding: Introduction and Preparations | Copyright (c)2010 American Megatrends, Inc.All experienced and courageous users, who want to update a PCI ROM module of their mainboard BIOS: I can't attach a report of the MMTool on the ROM image, so I'll embed it at the end of the post.Ĭould you please give me a hint how to do it? Should I just add an iPXE.efirom to the image? Or should I replace something? Do I have to link iPXE.efirom to VID&PID or not? I've opened it with MMTool Aptio () and I can see and modify the content of the image.īut I have no idea how to embed the iPXI EFI image into the BIOS. ![]() The BIOS image I've downloaded from ASUS site is quite clear an EFI image. As a fallback solution I plan to use USB stick with iPXE image, but the best would be to burn iPXE into the MB firmware. The stations will be placed in not so easy accessible location, so I don't what any storage inside them. The mainboard in the diskless computers is ASUS P8B75-V, ethernet controller is Realtek 8111E. I'm planning to deploy several diskless stations with network boot from the iSCSI target on dedicated storage server.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |